Homewerks - 511-48-114-114- - Schedule 40 1-1/4 in. Compression T X 1-1/4 in. D Compression PVC Compression Tee

1-1/4 inch Compression Tee - Comp x Comp x FPT. NDS PVC IPS compression fittings are used in residential and commercial DWV, Irrigation, Pool and Schedule 40 pressure applications. Compression cap should be drawn up hand tight to insure proper alignment and seating of gasket, then tighten 3/4 to 1 turn with a flo spanner wrench or strap wrench. Average torque should be approximately 25 feet lbs. on 1/2 inch through 2 inch IPS and 35 feet lbs. on 2-1/2 inch and larger IPS. Compression fittings are not for use on compressed air lines or natural gas lines. When installing the standard compression seal fittings the pipe line must be restrained from lateral movement by thorough soil compaction on straight runs and thrust blocking at change of direction or reduction in size. Compression x female pipe thread connection Approved for cold water only Adds tee connection on galvanized or plastic pipe Made with high-impact PVC

• Average Lead Content: Lead-Free
• IAPMO Certified: No
• Material: PVC
• Maximum Pressure: 150
• NSF Listed: Yes
• Number in Package: 1
• Packaging Type: Bulk
• Product Type: Compression Tee
• Schedule Type Number: Schedule 40
• Brand Name: Homewerks
• End 1 Diameter: 1-1/4
• Application: Direct Connect
• End 1 Type: Compression
• End 2 Diameter: 1-1/4
• End 2 Type: Compression
• End 3 Type: FPT
• ANSI Certified: Yes

PVC TEE S40 1-1/4" COMP
SDS information: Homewerks 511-48-114-114-